ANGLE BROOM

Keep it clean... Thomas' hydraulic drive 6-ft. (1.8m) wide angle broom features heavy-duty construction and two way 30° angle adjustment. It's 32-inch (813mm) diameter brush is constructed of 1/2 poly and 1/2 wire for improved cleaning and maximum brush life. Water kits and gutter brushes are available as optional equipment.

[Back to the top]

BH108 BACKHOE

Turn your Thomas into a powerful excavator with a BH108 side shift backhoe. It's narrow profile and vertical stabilizer design, combined with it's unique side shift feature, provides you with straight line digging capability when working close to walls and obstructions. Available with your choice of internal or external control systems, the BH108 features a full 8.5-ft. (2.59m) digging depth.

[Back to the top]

BUCKET SWEEPER

The perfect choice for road, driveway or parking lot cleaning. The versatile bucket sweeper sweeps in both forward and reverse directions, depositing material directly into the sweeper's bucket. The sweeper's front caster maintains proper sweeping height while it's bucket cutting edge makes short work breaking up caked-on mud. Available in 60-inch (1.5m) and 72-inch (1.8m) widths, the sweepers versatility can be increased with optional water sprinkler kits and gutter brushes.

[Back to the top]

BUCKETS

They don't any tougher than Thomas. All dirt buckets are constructed out of heavy 7-gauge steel plate and feature 5-bottom wear plates for maximum strength in heavy digging. The high abrasion resistant "Tensiloy" cutting edge is pre- drilled to accept an optional reversible bolt on cutting edge. Tooth bars, bucket teeth and a wide variety of special application buckets are also available.

[Back to the top]

DOZER BLADE

Push it, grade it. and reshape the earth the way you want it to be. Available both in 70-inch and 78-inch (1778mm and 1981mm) widths, the Thomas dozer features heavily reinforced 7-gauge steel plate construction and hydraulic 30° angle adjustment.

[Back to the top]

HYDRAULIC BREAKER

Three hard hitting models with output ratings from 150 ft. lbs. to 500 ft. lbs. (21kg m - 69kg m) up to 1200 blows per minute make short work of the toughest jobs. Simple, efficient low recoil design requires no surge dampening or pressure accumulator which translates into fewer moving parts, fewer problems and long high power trouble-free performance. All breakers are available with a wide choice of quick change tools.

[Back to the top]

HYDRAULIC SPREADER

Get a grip on winter's worst. The Thomas spreader is ideal for ice control, spreading salt or sand on driveways, sidewalks, parking lots or any slippery surface. The self-loading 9 cu. ft. (26 cu. m) hopper features an internal agitator to prevent bridging and plug ups. Flow to the hydraulic-driven discharge disc is fully adjustable. Off-season, the spreader easily handles fertilizer, grain or grass spreading chores.

[Back to the top]

INDUSTRIAL GRAPPLE BUCKET

Rip out walls or anything else that stands in your way with a Thomas heavy-duty industrial grapple bucket. THe bucket features heavy 3/16-inch (5mm) back and side plates of full 1/2-inch (13mm) steel plate construction. The independant dual tine system allows secure clamping of uneven loads. Grapple tines are operated by 2-inch (50mm) industrial cylinders which are fully shielded for maximum protection.

[Back to the top]

LANDSCAPE RAKE

Reshape your job site. Featuring a full 8-ft. (2.03 m) working width and a 30° hydraulic angle adjustment, the grader rake not only cleans up debris but can finish grade leveling out and effeciently smoth out rough spots and ruts. Take advantage of its full floating action and quick adjust wheel system for ditching and crowning road and driveways.

[Back to the top]

POST HOLE AUGER

Turn your fencing and hole boring jobs into a one-man operation. You'll dig holes with plumb line accuracy regardless of the ground conditions thanks to the auger's double pivot mounting system. Powerfull and fully reversible, you'll appreciate the auger's high torque, heavy-duty drive system which makes light work of the toughest conditions. Wide choice of auger bit diameters and styles allows you to tackle any job.

[Back to the top]

POWER BOX RAKE

The perfect tool in preparing for seeding or sodding. Tear up old sod, level, fill in the low spots while removing stones and debris. Operates moving forward or reverse, the 72-inch (1829mm) toothed power bar rotates 20° in either direction allowing you to windrow material. Removable end plates trap and gather stones for piling and pickup.

[Back to the top]

TRENCHER

Take a deep bite out of your trenching chores with a versatile trenching attachment. Available in a variety of digging depths from 2 ft. (.6m) to 6 ft. (1.8m), and a choice of chain styles and cutting widths from 5 1/4 inc (133mm) to 12 inches (305mm) lets you match the trencher to your specific requirements. The fully reversible trencher comes with hydraulic side shift and a side discharge auger.

[Back to the top]

XR911 BACKHOE

The Thomas XR911 gives you two backhoes in one. Retracted, the XR911 provides all the advantages of a 9 ft. (2.75m) backhoe with high bucket and boom breakout force for maximum productivity. When you need more digging depth or reach, the dipper hydraulically shoots out another 2 ft. (610mm) turning instantly into an 11 ft. (3.35m) backhoe.

[Back to the top]

PALLET FORKS

Whether on the farm, landscaping, construction site, or in industrial plants, your Thomas, fitted with a pallet fork, will handle your bagged or palletized bulk material with ease. The fork's dual high strength tapered tines are available in a variety of lengths up to 48 inches (1220 mm) to match your unique material handling needs. The Thomas pallet fork features free-floating tines which makes pickup when working on uneven ground a breeze.

[Back to the top]

4:1 BUCKET

Dig it, push it, drag it or grab onto it...
The Thomas built 4 in 1 bucket does it all. Built Thomas tough to take the abuse, the 60" Thomas combination bucket features heavy-duty 2.5" industrial hydraulic cylinders for powerful clamping action with a 7.5" stroke. Solid 7 gauge heavy steel plate construction with 3 maximum strength 1/2" by 4" bottom wear plates and three high abrasion resistant cutting edges. Designed for skid steer loaders with a minimum lifting capacity of 1300lbs.

[Back to the top]